12 Slots 1″ High Profile Picatinny Rail Bridge Mount BM1210EX
- 75″ lightweight picatinny base mount (2 1/4 inches long) bm1210ex. 12-slot picatinny rails (5″ long) height 0.
Mossberg 500/590 Series Shotgun Picatinny Rail Mount
- Installs via included set screws into the mossberg factory mounting holes. Crafted from lightweight aluminum, 54 inches in length and 14 ounces in weight. Allows for the mounting of picatinny or weaver standard scopes, red dots, magnifiers, or other optics. Picatinny rail mount for mossberg 500 and 590 series and equivalent shotguns.
5 Slot 2″ Keymod Rail Section Picatinny Rail for Key Mod Handguard Mount Rail System
- Solidly attached using the keymod rail interface, great for rifles, shotguns paintball & airsoft. Perfect for attaching your 1913 picatinny lights, bipods, forward grips, sights or other accessories. Package includes all necessary screws and locking nuts, as well as a l hex key for easy installation. Milspec 5-slot picatinny rail section fully compatible with any key mod handguard mounting system. Quality built rail system with lightweight aerospace grade aluminum alloy with durable black matte.
SNIPER® Rail Mount Adapter, Mount Adjustor, Dovetail to Picatinny
- Lightweight aircraft grade aluminum with black matte finish. Height 067 in width 102 in length 39 in weight 24 oz. Includes stop pin and all hardware. 394 inch long grooved rail, 9 slots. Converts 3/8″ dovetail to 7/8″ weaver rail.
AR15 Ultralight Keymod Picatinny Rail Sections, 8 Slots with QD Swivel Socket, allows for fast modular attachment of grips, slings, bipods, sights, flashlights, lasers or other AR accessories.
- Mil-spec picatinny rail and keymod nut. Perfect for attaching accessories such as ar flashlights, bipods, forward grips, sights, lasers or other ar15 accessories. Includes a standard qd sling swivel. Protrusion on the back of rail helps lock the rail securely. Ar 8-slot keymod picatinny rail section featuring a standard 3/8” qd swivel socket.
GVN M-Lok Polymer Rail Section 5,7,9,11 Slot Polymer Picatinny/Weaver Rail(4 Pieces Black)
- Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, rail sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. Designed for use with and forends, the polymer rail sections allow the attachment of various 1913 picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Screws and everything you need included. Polymer 1913 rails come in l2 size (5 slots)l3 size (7 slots) l4 size (9 slots) l5 size (11 slots) 4pcs black set. Available in four lengths, so you can position just enough rail area exactly where you need it for each accessory.
Evolution Gun Works Picatinny Rail Scope Mount, Black, Remington 700 Long Action, 20 MOA
- Itar product by adding to cart, i confirm that i am us person, i agree that i do not intend to export this product, and i understand this product is regulated by the international traffic in arms regulations (itar). The bolt pattern on remington 700 long action mount fits long action remington 700 rifles (example 30-06, 300 win mag), as well as the 740 and 40x. Itar product by adding to cart, i confirm that i am us person, i agree that i do not intend to export this product, and i understand this product is regulated by the international traffic in arms regulations (itar).
Picatinny Rail Sections for Keymod System, Modkin Lightweight Keymod Rail Mount Pack of 3 (13-Slot 7-Slot 5-Slot), Aluminum in Black
- ☑ Premium craft & material precision manufacturing in high quality aluminium alloy with oxidized black matte finish. ☑ professional keymod accessories professional keymod picatinny rail sessions to provide direct approach to attach kinds of tactical accessories on airsoft rifles with keymod system. ☑ Universal for all keymod system & picatinny rail fit all standard key mod mounting system, picatinny rail support all 20mm picatinny/weaver accessories. ☑ Pack of 3, 3 different size option the package includes 5-slot, 7-slot and 13-slot sections, offer 3 choice for different size of tactical accessories locking nuts and allen wrenchs are provided. ☑ Low profile & lightweight design in extrem lightweight and low profile, will not add any load or obstruct the sighting at all in the field (10-slot weights only 18oz ).
Nc Star Dovetail To Picatinny Rail Adapter/Short, 3/8″
- Low profile rail for mounting optics as low as possible. Black anodized aluminum construction. Mounting tool included. 375 overall length for those shorter 3/8 dovetail rails.
GVN Keymod Picatinny Rail Section 4 Inch/9 Slot Picatinny/Weaver Rail (2 Pieces Matte black)
- The rail have the protrusions that lock into the key mod holes solidly attached using the keymod rail interface, for rifles, shotguns paintball & airsoft. Package includes all necessary screws and locking nuts, as well as a l hex key for easy installation. Quality built with lightweight aerospace grade aluminum alloy with durable black matte finish. Perfect for attaching your 1913 picatinny lights, bipods, forward grips, sights, or other accessories. Mil-spec 9-slot picatinny rail section fully compatible with any key mod handguard mougntin sytstem system.
Twod Rifle Scope Mount Rings 1” / 30mm Cantilever for 20mm Picatinny Rail Nikon Leupold Vortex Burris and Other Optics
- Use of 6 screws in total is more secure than 2 screws on standard mounts. This mount is strongly built and perfectly smooth in its construction. Fits a 1” / 30 mm rifle scope. Riser mount for rifles with 217 standard picatinny weaver rail, ring bases are milled as a single, tough unit, and rear ring tops feature picatinny tops for mounting. Easy installation with minimal effort over the rail and the cleaning rod.
Super Lightweight Keymod Picatinny Rail Sections,pack of 3 (3-slot,5-slot,7-slot)
- Standard, installed perfectly on any standard keymod handguard, strictly follow picatinny and keymod specification allen wrench and all keymod screws/nuts are included attention compared to other competitors with a flat back, this set of rails has protrusion on the back to help get the rail installed more securely. Cost-effective, pack of 3 (3-slot,5-slot,7-slot) cost only $6 per rail, there’s no other hollow-out rail cost so less. If you are buying these rails for bipod installation on your keymod handguard, please search b06xffcr5t in the search box, this high quality bipod adapter will attach your bipod directly to your handguard without installing the picatinny rail. Durable, made of 6061-t6 aluminum alloy with black matte finish. Super lightweight, hollow-out design,7-slot weights only 076oz.
Marlin 1895, 336, 444, Camp Carbine 9mm, Camp Carbine45 Picatinny Rail Scope Mount 0 MOA
- Egw marlin 1895, 336 and 444 tactical scope mount rail, black, 47100. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Overall length of mount 5. 4″” high. Mounting hardware hex head screws and wrench provided. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. Also, in many cases, it will not obstruct usage of factory iron sights. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Machined from domestic 6061 t6 extruded aluminum. This base sits at approximately 0. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Center spread 2. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The center spread is the distance between the two middle holes, center to center, on your receiver. 75″. Finish matte black anodized. 094″. This will also fit the camp carbine 9mm and camp carbine45 acp.
Keymod Picatinny Rail Sections, Monoki 3-Slot 5-Slot 7-Slot Lightweight Picatinny Rail Section for Keymod Handguard Mount Rail System with 3 Allen Wrench, 3 Pack – Black
- ❖ compatible with any standard keymod handguard mounting system, picatinny accepts all standard picatinny accessories. ❖ Super lightweight keymod rails with hollow-out design, 7-slot weights only 065oz. 【Notice】 our listing recently received continuously 3 bad reviews on october 23, 2017, they are not “verified purchase” certification, please do not believe these, because they are malicious bad reviews from our a competitor these buyers havn’t order the sight from us we have complained to amazon, but need time to handleour sights is hight quality,we offer warranty service, if the item has any problem, pls feel free to contact us, we will offer return or refund all the time thank you. ❖ Pack of 3-slot, 5-slot, 7-slot hollow-out rails, 6 sets matched screws, 6 sets locking nuts and 3 sets allen wrench ❖ add more accessories with these rails, perfect for attaching picatinny flashlights, bipods, forward grips, sights, or other accessories. ❖ Made of durable mil-spec aluminum alloy material with black matte finish.
Monstrum Tactical 1″ Offset Picatinny Rail Mount for Flashlights
- Mount is 1″ in diameter, 18″ in length, 16″ in height, and 16 ounces in weight. Mounts to any standard weaver or picatinny 1913 rail, with the flashlight offset to the side. Offset rail mount for mounting flashlights to rail equipped rifles or shotguns. Crafted from high quality, lightweight aluminum.
Feyachi 220 Lumen Tatical Weaver Mount Pistol/Rifle LED Flashlight Quick Release For 20mm Picatinny Rail
- 220 lumen peak output and uses 1 cr123a lithium type batteries (included). Lamp holder scalable have astigmatic function and spotlight lighting function. Constructed of solid anodized aluminum flashlight waterproof & shock resistant. Have 3 models light high/ low/ strobeambidextrous switch modes push on/off switch. Come with quick detache systemeasy to install and remove.
Blackhawk Swivel Stud Picatinny Rail Adapter
- Contains side swivel stud for continued use of sling. Extra-strength injection molded belt loop. Provides a picatinny rail section for rail-mounted accessories. Adjustable buckle and sturdy snap for easy draw. Mounts to rifle’s existing swivel stud. Constructed of rugged 6061 t6 aluminum w/type-iii hard-coat anodized finish.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
