Bowjax Max Jax Stabilizer, 7-Inch, Lost Camouflage
- Available in lost camo color. This new stabilizer comes in licensed realtree apg, it’s a solid aluminum stabilizer, it weighs 8 ounces, and comes with 2 black max jax dampeners included. You can get other color patterns of this part model no-1049. Vibration this stabilizer has a threaded hole on the end for extra weights.
Bowjax Red Ultra Jax 1 Bow String Dampender & Silencer 4 Pack
- The ultrajax i system is an easy way to silence the noisy string. This bow string dampener is the one that put bowjax on the map. For compound bow users that are looking for even more dampening ability, attach a slipjax to your cable. These weight 21 grains each. It is designed to be used without a bow press. Simply put the ultrajax i on the bowstring and use the supplied plastic ties or your own bow string material to cinch bow string silencer to the bow string.
Bowjax 1048 Max Jax Stabilizer (5-Inch, Black)
- The maxjax stabilizer also has a threaded hole at the end to add additional accessories. The bowjax maxjax stabilizer has found the perfect combination of weight-forward technology and maxjax stabilizer dampeners.
Bowjax Revelations Split Limb Dampener, 15/16-Inch, Red
- It is made of two piece rubber and without screws. Revelations split limb dampener fits a gap of 15/16-inch. These fit pse bows, bears and mathews.
Bowjax Monsterjax Solid Limb Dampeners, #1022 (Red)
- Solid limb monsterjax should be placed on the flat part of the limb between the cam and the limb pocket, in many cases 5, 7 inches down from the cam. Monsterjax base is 7/8″ width, arms span 1-5/8″ width. Bowjax monsterjax solid limb dampener features 6 arms that vibrate at different frequencies to dampen noise and vibration.
Bowjax Split Limb Complete Crossbow Kit, Black
- The limb dampeners are universally sized to fit gaps between 3/8″ up to 1 1/8″ wide. This kit comes in black and everything can be installed without a bow press except the string silencers. It has 2 universally sized split limb dampeners, a pair of stirrup dampeners, 4 of the heavy duty crossbow string silencers, and 1 bolt spring dampener. The stirrup dampeners go on easy if your stirrup has a screw to detach it from the crossbow, then you simply unscrew it and slide these dampeners on. The most complete kit.
Bowjax SlimJax Cable Guide Rod Dampener, #1012 (Orange)
- The bowjax slimjax can be used on a compound bow on the cable guide rod, or on the foot stirrup of a crossbow to help with vibration. Bowjax believes that a more effective rod damper must have the flexible arms to knock out the noise and vibrations felt by the modern day archer.
Bowjax Super Size Max Jax Stabilizer Dampener, Black
- They fit 3/4 inch diameter and stretch up to 1 1/2 inch in diameter, they are much bigger than the original maxjax model no 1050 and they weight 475 grains each. These dampeners stretch over an existing stabilizer to take unwanted vibration out of your bow.
Bowjax Revelation Split Limb Dampeners, 2-pack, #2026 (Orange)
- Bowjax revelation split limb dampeners #2026 fit a 15/16″ width up to a 1-1/8″ gap. No screws or adhesive needed. Weigh 480 grains each. Note for smaller gaps, use the bowjax revelation #2025.
Bowjax MaxJax Stabilizer Module, Black, 2-Inch
- The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 25 ounces. 5/16″ x 24 thread, weights 2. 4-arm dampener helps dampen noise and vibration for your stabilizer.
Bowjax Magnum Jax Split Limb Dampener, 1/2-Inch, Black
- Without a doubt, this limb dampener is our most effective limb dampener for split limbs. The magnum split limb dampeners represents the next level of innovation for limb dampeners.
BowJax Stopper for String Suppressors, #1058 (Black)
- The bowjax short stop replacement stopper is a stopper for bowtech/diamond 2008 series string suppressors. The airborne stopper series is for 2008 series bowtech airborne an diamond marquis string suppressors. Long-lasting direct replacement.
Bowjax Smaller RizrJax Black 2 pk
- We’ve been getting asked by customers and bow companies about the best solution for taking vibration out of the bow riser itself. Rizrjax in black 2pk. Made by bowjax. After extensive testing and the development of the monsterjax, the r&d department at bowjax has come up with the new rizrjax. If you’ve got a bow with some vibration, throw on some rizrjax and notice the difference rizrjax ll dampeners fits cut out smaller holes up to 1 in width.
Bowjax SlimJax Guide Rod Dampener, Green
- Width 1″. Cable guard dampener designed not to interfere with your sight window. Can be placed in front of the cable slide to act as cable guard stop.
Bowjax Revelation Split Limb Dampeners fits 11/16 Hoyt (4-Pack), Red
- X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. Limb dampeners designed for split limb bows. 11/16″ size fits hoyt and newer bowtech with split limbs. 15/16″ size fits bows with wider gaps such as mathews, pse, and bear.
BowJax Magnum Split Limb Dampener .700
- Mfg item number 1026a. Widejax limb dampener to fit bows with wide spaced split limbs, designed with six arm monsterjax dampening and pads that are four times thicker than the originals for additional noise and vibration reduction. Fits most hoyt split limb bows.
Bowjax Black Ultra Jax 1 Bow String Dampender & Silencer 2 Pack
- This bow string dampener is the one that put bowjax on the map. For compound bow users that are looking for even more dampening ability, attach a slipjax to your cable. These weight 21 grains each. The ultrajax i system is an easy way to silence the noisy string. Simply put the ultrajax i on the bowstring and use the supplied plastic ties or your own bow string material to cinch bow string silencer to the bow string. It is designed to be used without a bow press.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
