Coolest 16 1 Scope Rings

 

Monstrum Tactical 1 Scope Ring Set High Profile with PicatinnyWeaver Rail Mount

Monstrum Tactical 1″ Scope Ring Set, High Profile, with Picatinny/Weaver Rail Mount

Monstrum Tactical 1″ Scope Ring Set, High Profile, with Picatinny/Weaver Rail Mount - High profile in height, 07 inches from base of mount to bottom of rings. See through channel at the base of the rings allows for simultaneous use of low profile front sights. Mounts to any flat top picatinny or weaver rail equipped rifle. 1 inch diameter scope rings for mounting standard 1″ tube rifle scopes. Light weight aerospace aluminum construction.

 

MODEL 710 940NM LED Infrared Torch – Outdoor IR Flashlight - Long Range Infrared Illuminator  Recharge Battery  Charge  Remote Pressure Switch 1 Scope Ring Set Side MountAll-in-One Kit

MODEL 710 940NM LED Infrared Torch – Outdoor IR Flashlight – Long Range Infrared Illuminator + Recharge Battery + Charge + Remote Pressure Switch+ 1″ Scope Ring Set, Side Mount(All-in-One Kit)

MODEL 710 940NM LED Infrared Torch – Outdoor IR Flashlight – Long Range Infrared Illuminator + Recharge Battery + Charge + Remote Pressure Switch+ 1″ Scope Ring Set, Side Mount(All-in-One Kit) - 4 adjustable beam, spot to flood by pull or spin the torch head, pushbutton tail switch for momentary on and constant on/off. 3 deep parabolic reflector for a long range targeting beam, unbreakable polycarbonate lens with scratch resistant coating. 1 increased detection range, identify objects more accurately. 2 high power ir (infrared) led, 940 nm, only visible with night vision equipment, suitable for night vision devices with 810nm-1110nm wavelength and 940nm would be best. 5 35 hour operating time, boasts a 150 yard range, includes super ir flashlight with 1 rechargeable 18650 type battery and a charger an adjustable ring mount and matchable pressure switch whether include will depend on your chose on variation area.

 

Pair of Dovetail 1 Scope Rings - Choice of Medium or High Profile - Fits 38 - 58 Dovetail 11mm-15mm 22 Air Rifle Airgun High Profile

Pair of Dovetail 1″ Scope Rings – Choice of Medium or High Profile – Fits 3/8″ – 5/8″ Dovetail (11mm-15mm) .22 Air Rifle Airgun (High Profile)

Pair of Dovetail 1″ Scope Rings – Choice of Medium or High Profile – Fits 3/8″ – 5/8″ Dovetail (11mm-15mm) .22 Air Rifle Airgun (High Profile) - Medium profile rings (a) + (b) medium (a) 2 screws per ring, 1 side plate screw depth 16mm medium (b) 4 screws per ring, 2 side plate screws depth 21mm (all other measurements are identical) check your scope dimensions with the measurements below to ensure proper clearance. Top of base to bottom of scope tube / ring medium (a) 14 mm medium (b) 14 mm high profile 21 mm top of base to center of ring medium (a) 26 mm medium (b) 26 mm high profile 30 mm. Fits any dovetail rail measuring 11mm to 15mm wide choose from medium (a), medium (b) & high profile. Well constructed pair of 1 inch (25mm) scope rings with locking side plate that ensures a tight fit to dovetail mount / rail.

 

Ade Advanced Optics 1 Scope Ring Adaptor with Picatinnyweaveruniversal Rail

Ade Advanced Optics 1″ Scope Ring Adaptor with Picatinny/weaver/universal Rail

Ade Advanced Optics 1″ Scope Ring Adaptor with Picatinny/weaver/universal Rail - Lets you mount such accessories as red dot sight, laser, or flashlight. Precision machined out of premium 6061 aircraft aluminum. Weighs 07 ounces. Measures 18 inches long. Single weaver-style 1 inch scope adapter.

 

1 Dovetail Scope Rings Modkin High Profile Scope Mount for 11mm Dovetail Rails -2 Pieces One has stop pin

1” Dovetail Scope Rings, Modkin High Profile Scope Mount for 11mm Dovetail Rails -2 Pieces (One has stop pin)

1” Dovetail Scope Rings, Modkin High Profile Scope Mount for 11mm Dovetail Rails -2 Pieces (One has stop pin) - One of the mounts features a stop pin, for rock solid application. With two rail clamp screws and two scope clamp screw per side, precision and repeatable alignment. High profile, 21mm(08 in) from top of the rail to bottom of rings ( item height 19”). The ring is for most scopes which are in 1”/ 254mm scope tube. Double scope ring mount for 11mm dovetail rail, specialized scope mount for 22/airgun.

 

JahyShow Rifle Scope Mount Dual Rings 1 Inch 254 mm 30mm Cantilever for 20mm Picatinny Rail Optics Adjustable

JahyShow Rifle Scope Mount Dual Rings 1″ Inch 25.4 mm 30mm Cantilever for 20mm Picatinny Rail Optics Adjustable

JahyShow Rifle Scope Mount Dual Rings 1″ Inch 25.4 mm 30mm Cantilever for 20mm Picatinny Rail Optics Adjustable - Use of 6 screws in total is more secure than 2 screws on standard mounts,heavy duty, hold up under heavy recoil sustained fire in the most extreme circumstances. Easy installation with minimal effort over the rail and the cleaning rod. Scope mount with two round buttons for easy detach. This mount is strongly built and perfectly smooth in its construction. Fits 20mm picatinny weaver rails & comes with 254mm reducer inserts,fit for both 30mm and 254 mm (1 inch) body tube rifle scopes.

 

Mizugiwa 1 Inch Scope Mount Rings High Profile 11mm Dovetail See-Thru

Mizugiwa 1 Inch Scope Mount Rings High Profile, 11mm Dovetail, See-Thru

Mizugiwa 1 Inch Scope Mount Rings High Profile, 11mm Dovetail, See-Thru - Scope mount rings 1″inch diameter tube. With four screws design, it will hold the scope more securly than a single screw on both sides. Scope rings are for standard riflescopes 254mm scope tube. 3/4 inch gap between tube and top of rail.

 

Weaver Scope Rings Modkin Medium Profile Scope Mounts for PicatinnyWeaver Rail 1 inch Set of 2

Weaver Scope Rings, Modkin Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)

Weaver Scope Rings, Modkin Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2) - ❶ Double scope ring mount for picatinny/ weaver rail (20mm). ❹ The ring is for most scopes which are in 1”/ 254mm scope tube high profile, 098” gap from base of mount to bottom of rings ( item height 21”). ❷ design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope. ❺ With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily. ❸ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

 

1inch Scope Ring Set with Stop Pin for High Power Magnum Airguns Air Rifles

1inch Scope Ring Set with Stop Pin for High Power Magnum Airguns Air Rifles

1inch Scope Ring Set with Stop Pin for High Power Magnum Airguns Air Rifles - This is a set of high scope rings made specially for use with high power airguns. Side clamping plate can be reversed so that the rings work on both 3/8inch and 11mm dovetails. Saddle height 21mm center height 34mm. One of the rings has a pointed stop pin built in and can be applied when needed using the l hex wrench that comes with the ring set.

 

Taousa 70263 Tactical High Profile 30mm 1 Scope Rings WeaverPicatinny Rail Mount Quick Detach See-Thru2 PCS 1118 Inch Diam4-Screw

Taousa 70263 Tactical High Profile 30mm/ 1″ Scope Rings Weaver/Picatinny Rail Mount Quick Detach See-Thru(2 PCS, 1/1.18 Inch Diam,4-Screw)

Taousa 70263 Tactical High Profile 30mm/ 1″ Scope Rings Weaver/Picatinny Rail Mount Quick Detach See-Thru(2 PCS, 1/1.18 Inch Diam,4-Screw) - Friendly ergonomic quick detach/lock lever fully adjustable to fit on any picatinny rail. Taousa is a registered trademark owned by taousa llc unauthorized sellers are not allowed to list their products under this listing. Made from aircraft-grade aluminum alloy with anodized black matte finish quick detach see-thru, 1/118 inch diam, 4-screw, hi profile. High quality synthetic protective tape applied on rings internal surface. Includes 2x 1 “/118 ” picatinny scope rings, 1 pairs of rings, 1x l wrench key for adjusting the center pin.

 

Lirisy 1 Dovetail Scope Mount Rings Medium Profile for 11mm Dovetail Rails 2 Pieces

Lirisy 1″ Dovetail Scope Mount Rings Medium Profile for 11mm Dovetail Rails (2 Pieces)

Lirisy 1″ Dovetail Scope Mount Rings Medium Profile for 11mm Dovetail Rails (2 Pieces) - — With four screws design, it will hold the scope more securly than a single screw on both sides. — scope rings are for standard riflescopes 254mm scope tube. — One of the rings has a stop pin the bottom of it for rock solid application. Pack in lirisy exclusive design packing box,make it different and special,good gift to your boy friend,father,grandfather. — Scope rings type medium profile (14mm),fit for a 22 rifle or an air rifle using a 3/8″ or 11mm dovetail mount.

 

Sniper Dovetail 1 Scope Rings for 22 Airgun Air Rifle Medium Profile Fits 11mm - 15mm Dovetail Rails

Sniper Dovetail 1″ Scope Rings for .22 Airgun Air Rifle; Medium Profile; Fits 11mm – 15mm Dovetail Rails

Sniper Dovetail 1″ Scope Rings for .22 Airgun Air Rifle; Medium Profile; Fits 11mm – 15mm Dovetail Rails - 181″ x 161″ 083″ (l x h x w) 11 ounces. For dovetail rail mount/base (fits 11m-15mm rail width). Pieces 2. Medium profile 33mm from top of rail mount/base to center of ring. Color black.

 

Cantilever Scope Mount Modkin 1 inch 30mm Dual Ring Rifle Scope Mount Cantilever Weaver Picatinny Forward Reach

Cantilever Scope Mount, Modkin 1 inch 30mm Dual Ring Rifle Scope Mount Cantilever Weaver Picatinny Forward Reach

Cantilever Scope Mount, Modkin 1 inch 30mm Dual Ring Rifle Scope Mount Cantilever Weaver Picatinny Forward Reach - ✔ Cantilever weaver forward reach, 20mm tops feature picatinny and weaver tops for firm mounting. ✔ Precision finishing from high quality aluminum alloy, anodized black matte finish protect the mount from being scratched. ✔ Heavy duty, solid and durable to mount any scope, flashlight, red dot sight, of which the tube is in 254mm(1 inch) or 30mm. ✔ Professional standard scope mount for 20mm picatinny and weaver rails. ✔ 1 inch/ 30mm dual rings available for 2 different, standard scopes, easy and quick to replace the rings with allen wrench.

 

WOLTIS Quick Release Scope Rings  Quick Release Scope Mount Rings Scope Mounts  Picatinny Scope Rings  1 Inch Scope Mount Rings  1 Inch Scope Rings  Quick Detach Scope  Scope Rings 1 Inch Black

WOLTIS Quick Release Scope Rings / Quick Release Scope Mount Rings (Scope Mounts / Picatinny Scope Rings / 1 Inch Scope Mount Rings / 1 Inch Scope Rings / Quick Detach Scope / Scope Rings 1 Inch Black

WOLTIS Quick Release Scope Rings / Quick Release Scope Mount Rings (Scope Mounts / Picatinny Scope Rings / 1 Inch Scope Mount Rings / 1 Inch Scope Rings / Quick Detach Scope / Scope Rings 1 Inch Black - Center split rings maintain reticle alignment during installation. Features innovative spring-loaded clamp the clamp place the majority of the clamping force upon the rail, not the ring. Rugged, lightweight, anti-snag design / robust,. Sold one per package. Fits common rifle scopes with 25mm and scope tubes,centerline height 1053″.

 

1 inch Dual Ring Cantilever Scope Mount Black TRI Mount for Lasers Flashlights Nikon Leupold Vortex Burris

1 inch Dual Ring Cantilever Scope Mount Black TRI Mount for Lasers, Flashlights, Nikon, Leupold, Vortex, Burris

1 inch Dual Ring Cantilever Scope Mount Black TRI Mount for Lasers, Flashlights, Nikon, Leupold, Vortex, Burris - 1 inch dual ring cantilever scope mount dark earth tri rails weaver, picatinny. Pepr. Ring bases are milled as a single, tough unit, and rear ring tops feature picatinny tops for mounting additional accessories. All heat treated steel and aluminum construction and precise machining (n49) for 1 inch scope. Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories- 1 inch rings.

 

Ade Advanced Optics 1-Inch Scope Adapter RingMount with PicatinnyWeaver Top Rail for BackupSecond Laser Anodized Black

Ade Advanced Optics 1-Inch Scope Adapter Ring/Mount with Picatinny/Weaver Top Rail for Backup/Second Laser, Anodized Black

Ade Advanced Optics 1-Inch Scope Adapter Ring/Mount with Picatinny/Weaver Top Rail for Backup/Second Laser, Anodized Black - Weighs 09 ounces. Single weaver-style 1 inch scope adapter. Precision machined out of premium 6061 aircraft aluminum. See through design. 5 slots picatinny/weaver rail for backup/second laser, sight or light.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.