Best 17 Windlasses for 2020

 

Pactrade Marine Boat Anchor Windlass Winch Foot Compact Switch Black 2 pcs Up & Down 12/24v 5A - Direct replacement,easy to install must be used with a contactor or control box supplied with fasteners required for installation. Hinged protect cover to prevent accidental operation hinged cover folds flat to the deck when in use. 2 piece foot switch material composite plastic with glass-reinforced polyester cover voltage dc12v/24v color black dimension 38” dia. Item number pe400003. 100% brand new windlass foot switch compact single direction switches anchor winch windlass foot switch, up & down ( raise & lower ).

 

Powerwinch Freefall Anchor Windlass 41′ Class - Makes it easy to anchor boat in precise location (no drifting). Free-fall anchor system designed for 41-foot class boats. Drops up to 4 times faster (300 fpm) than power-down anchors. 75 fpm retrieval speed weighs 23 pounds 3-year warranty. Stainless-steel rope and fasteners and watertight seals.

 

Lewmar CRW 400 Captive Reel Windlass, Black - ) Safe working load 150 lb. Load) anchor weight capacity of 16 kg (40 lbs. 5 m (25′) rode type rope rode size 35 m (115′) of 6 mm (1/4″) rope (included) speed up/down 25 m/min (82’/min) no load 400 watt 12 volt dc electric motor with 601 reduction ratio gearbox draw 15 amps at 12 volts dc (20 kg / 40 lb. Style horizontal 316 stainless steel chassis level-wind device prevents rope bunching maximum pull 275 kg (605 lb. ) max case material abs (uv stabilized) all stainless steel hardware and polymer bearings integrated switch/circuit breaker auto-stop device keeps a safe number of wraps on the drum at max deployment dimensions 175 mm h x 300 mm w x 365 mm l (7″ x 12″ x 14. Boat length up to 7. 3″).

 

Norestar Double Braided Nylon Rope and HT G4 Stainless Steel Chain, Boat Windlass, Prespliced Rode - Designed for use with windlasses. To determine your required rope/chain size, check your windlass manual. Includes stainless steel ht g4 chain professionally spliced to double braided nylon anchor rope. Save money, time, and effort by purchasing a pre-spliced package.

 

Lewmar V3 Go FF 12V 002 Stainless Steel Windlass Kit - The beautiful styled deck unit conceals a robust, reliable drive train, worm gearbox and splined shaft for maximum strength and control. Lewmar introduces the world’s first compact stainless steel windlass for power and sail boats.

 

Lewmar V700G Vertical Windlass with Rocker Switch and Control - Minimal parts for enhanced reliability. 100% 316 stainless steel deck unit. Late configure boat / chain on boatyard assembly line features. The v700 now comes with a gypsy able to accept both 6mm and 7mm (1/4) inch chains. Fits calibrated chains 6mm din766, 1/4 g4 or bbb, 7mm din766.

 

Maxwell RC8 12V Windlass – 1000W 5/16 Chain to 5/8 Rope - The all new rc8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4″) chain spliced to 12mm (1/2″) three strand or 8-plait rope. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the rc8 an unparalleled level of performance. The rc8 series is manufactured from marine grade 316 stainless steel for long term durability. Huge through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of top works utilizing handle provided, a screw driver and an allen key. Cone type clutch/brake mechanism permits manual, free fall anchoring. Maximum pull 1320lbsthe larger rc8-8 can be used with 8mm (5/16″) chain spliced to 14mm (9/16″) three strand or 8-plait rope. The rc8 works just as effectively with all-chain rodes for those who desire a low profile, elegantly styled windlass on their foredeck. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure. Manual override using the emergency crank handle prov. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. Sleek, low profile and max-grip capstan drum versions are available to suit individual user preference. The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the rc8 series. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass.

 

Dark Horse Marine Windlass Anchor Rode 5/8″ 8 Plait Nylon Rope Spliced to 15′ – 5/16″ Galvanized G4 Chain- High Performance Anchor Rode- Windlass Compatible - 8-plait will not hockle or kink. High-test galvanized chain is hot dipped. Splice is hand-woven and whipped in the us. 8-plait rope takes up less space in your anchor locker. 8-plait makes for a smaller splice to fit through your windlass.

 

Windlass Cobra Steel Lakonia Knife - This windlass cobra steel survival knife is based on the deadly spartan short sword. ” Hard rubber scales on a full profile tang. High carbon, factory sharp blade. The blade on the lakonia was shorter than other classical greek swords and the spartans said it was to bring them “one step closer to the enemy. Includes a heavy leather scabbard.

 

Lewmar PRO-Fish 700 6 mm-7 mm-1/4 Pro-Fish Windlass - Powerful motor providing fast line speed convenient above-deck installation. Automatic freefall strong 100 percentage 316 stainless steel, including control arm and stripper. For boats up to 12m (38ft. 5-year warranty manual emergency recovery equipped all you need is a common 1/2 socket wrench. Maximum pulling power 320kg (700 lb) for the 700 and 454kg (1,000 lb) for the 1000.

 

Maxwell 8″ Emergency Crank Handle f/RC & Freedom Series Windlasses - Emergency crank handle (rc series)for use with rc & freedom series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if accidentally dropped overboard.

 

Maxwell Windlass Foot Switch Replacement Bezel Cover – Black - Windlass foot switch replacement bezel cover, blackfeaturesreplacement for maxwell p19001, p19007 and p19006 windlass foot switchessize (bezel) 4″ diameter, blackincludes required fasteners.

 

Windlass Replica M1 Bayonet Knife New Manufacture Style - In 1942, the us military determined that a shorter bayonet was more useful. Scabbard available separately. This reproduction bayonet is made to original specifications from high carbon blued steel with hard plastic grips. In addition, new manufacture 10″ bayonets were also produced. Cut-off-bayonets have fuller that extends to the point and new manufacture has fullers that stop about 3″ from the point. M1 garand rifle was first issued with m1905 16″ bayonet. Made by windlass steelcrafts. Existing stocks of m1905 bayonets were cut down to 10″.

 

Stainless Steel Windlass 1/4″ G4 Anchor Chain 316 by 15′ Long Including 5/16″ Bow Shackles - More details are in the spec table below. 524. 84″0. This chain will fit many standard windlasses. Every 3 feet links are hallmarked and stamped with 316. 96″. The 3 important figures for smooth running or your windlass is the diameter (dia), inside length (il) and outside width (ow). Superb for anchor chain and general heavy duty work in a marine or chemically harsh environment. This is a quality, high grade, marine stainless steel (aisi 316) iso g4 chain suitable for use in a windlass as anchor chain or other marine applications where high corrosion resistance is desired. This listing is for 15′ of windlass chain before the shackles are added. This chain is 721. Please consult your windlass manufacturer model manual for the ideal specification for your windlass. The measurements of this chain are listed in mm and as g4 is generally considered an imperial chain, the imperial spec of this chain is 1/4″0. This 316 stainless steel windlass 1/4″ iso g4 anchor chain and is made to “g4″ dimensions and complies fully with all requirements of the us national association of chain manufacturers’ (nacm) specifications. Two quality 5/16″ bow shackles are included with the chain. 4 (diailow). The link size is 1/4″ imperial.

 

Stainless Steel Windlass Anchor Chain 316 10mm (3/8″) DIN766 by 20′ with Shackles - This chain will fit many standard windlasses. The 3 important figures for smooth running or your windlass is the diameter (dia), inside length (il) and outside width (ow). The link size is 10mm or 3/8″ imperial equivalent. More details are in the spec table below, this chain is 102832. This listing is for 20′ of windlass chain before the shackles are added. 74″1. 28″. Please consult your windlass manufacturer model manual for the ideal specification for your windlass. 5 (diailow). Superb for anchor chain and general heavy duty work in a marine or chemically harsh environment. Two quality shackles are included with the chain. As din766 is a metric specification we list the specs in mm, the imperial equivalent of this chain is 3/8″2. Every 3 feet links are hallmarked and stamped with 316. This is a quality, high grade, marine stainless steel (aisi 316) din766 chain suitable for use in a windlass as anchor chain or other marine applications where high corrosion resistance is desired.

 

Windlass Steelcrafts High Carbon Steel Hand Forged Shrewsbury Sword with Leather Scabbard - Made by the master craftsmen at windlass steelcrafts, the sword has been forged and replicated with a high carbon steel similar to 1095, which has strong edge-holding capabilities. Possessing enough breadth to cut, the shrewsbury sword is equally strong to thrust. This long slender blade is double-edged and finely tapered. The steel pommel is fig shaped and has been beautifully faceted. During the height of plate armor, this narrow, sharply-pointed sword was one of the most successful in finding chinks in armor or to even “punch through” if necessary. This sword has been named after the famous battlefield where prince hal (later henry v of england) defeated percy hotspur and is noted by the pierced crosses in the steel guard. The shrewsbury sword ships complete with a real leather scabbard, with both scallops and a pierced cross on its fittings, as well as a belt stop.

 

Stainless Steel Windlass 1/4″ G4 Anchor Chain 316 by 10′ Long Including 5/16″ Bow Shackles - 4 (diailow). The measurements of this chain are listed in mm and as g4 is generally considered an imperial chain, the imperial spec of this chain is 1/4″0. This chain will fit many standard windlasses. This chain is 721. 84″0. The link size is 1/4″ imperial. 96″. This listing is for 10′ of windlass chain before the shackles are added. Every 3 feet links are hallmarked and stamped with 316. The 3 important figures for smooth running or your windlass is the diameter (dia), inside length (il) and outside width (ow). Two quality 5/16″ bow shackles are included with the chain. Please consult your windlass manufacturer model manual for the ideal specification for your windlass. Superb for anchor chain and general heavy duty work in a marine or chemically harsh environment. More details are in the spec table below. This is a quality, high grade, marine stainless steel (aisi 316) iso g4 chain suitable for use in a windlass as anchor chain or other marine applications where high corrosion resistance is desired. 524. This 316 stainless steel windlass 1/4″ iso g4 anchor chain and is made to “g4″ dimensions and complies fully with all requirements of the us national association of chain manufacturers’ (nacm) specifications.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.