Euro Rocker Switch Cover with Text, Black with Blue Lens. Contura II, Fits Carling, Cole Hersee, Blue seas (WINDLASS (2 LENS))
- This listing is for the cover only, not the switch body. This is the most commonly used switch cover for marine applications but can also be used for cars/jeeps/side by sides & rv applications. These are made with hard plastic & hardy ink to stand up to constant use. This switch cover will snap right on to your existing switch. Some of the covers come with 1 or 2 lenses depending on what type of covers, review listed picture to verify. These covers will fit on most of the rocker switches we carry. Switch covers can be removed with our removal tool which can found on our website. Brand new euro rocker carling technologies contura iii switch cover that will fit mostly all carling technologies, blue seas & cole hersee rocker switches.
Windlass Up/down Switch . Five Oceans
- His five oceans´rocker switch panel allows up/down operation from any remote station, and it has stainless steel front. It does not handle windlass current draw, but easily handles solenoid current. To operate your windlass safely in all weather conditions you need top quality switch gear that can stand up to the elements. Five oceans´ switchgear is designed to ensure safe operation and long service life of your equipment.
Five Oceans C1512 Vertical Windlass 1500W – 3/8″ Chain & 5/8″ Rope – BC 3288
- It includes an impact-resistant motor cover, solenoid and reed switch magnet fitted as standard for chain counter. For powerboats and sailboats. Power pull (kgs/ib) 1200/2640 type vertical product number 3444. ) Speed down/min 131′ maximum pull 2640 lbs (1200 kg) motor 1500w voltage 12 volts current draw(a) 115 amps max. These are adequate for most installations. Installation details if the deck is not flat, a suitable mounting pad may be required to take up camber or sheer. Not to mention,it’s fitted with a heavy-duty control arm and stripper. Working load (kgs/ib) 485/1067 max. Noteworthy is the “failsafe” gypsy lock that prevents accidental deployment while underway. The standard (1/4″) threaded mounting studs supplied suit deck and packing thickness of up to 50 mm (2″). Package includes (wiring and fasteners are not included), solenoid, circuit breaker, up/down switch, foot switches, manual specification boat length to 50′ rode type rope/chain rode size 3/8″ chain, 5/8″ rope speed up/min 40′ (175lb. Decks that are thin, or of foam or balsa laminate construction, will require reinforcement in order to spread the loads that will be applied to the deck while the windlass is in use. This five oceans c1512 vertical windlass has a stylish low-profile, 100% stainless-steel design sit elegantly on the deck.
Lewmar V700G Vertical Windlass with Rocker Switch and Control
- Fits calibrated chains 6mm din766, 1/4 g4 or bbb, 7mm din766. The v700 now comes with a gypsy able to accept both 6mm and 7mm (1/4) inch chains. 100% 316 stainless steel deck unit. Minimal parts for enhanced reliability. Late configure boat / chain on boatyard assembly line features.
Maxwell RC8 12V Windlass – 1000W 5/16 Chain to 5/8 Rope
- Maxwell rc8 12v windlass 1000w 5/16 chain to 5/8 rope. Drops up to 4 times faster (300 fpm) than power-down anchors. 75 fpm retrieval speed weighs 23 pounds 3-year warranty. Makes it easy to anchor boat in precise location (no drifting). Stainless-steel rope and fasteners and watertight seals.
Lewmar PRO-SERIES 700 6 mm-7 mm-1/4″ Pro-Series Windlass
- And with push-button control and a built-in manual emergency recovery system, anchoring has never been easier. Praised by professionals worldwide, the horizontal pro-series is a shining example of lewmars commitment to provide quality products for boats from 6m-11. 5m (20-38ft). Its diy-ready, easy to install and housed in 100% 316 stainless steel, making it well protected and durable.
Five Oceans S612 Horizontal Windlass 500W – 1/4″ HT-G4 chain – 1/2” rope – BC 3930
- Package includes (wiring and fasteners are not included), solenoid, circuit breaker, up/down switch, foot switches, manual specification boat length to 20′ rode type rope/chain rode size 5/16″ ht chain, 9/16″ rope speed up/min. Decks that are thin, or of foam or balsa laminate construction, will require reinforcement in order to spread the loads that will be applied to the deck while the windlass is in use. 35′ (115lb. These are adequate for most installations. Power pull (kgs/ib) 540/1200 type horizontal product number 3930. It includes an impact-resistant motor cover, solenoid and reed switch magnet fitted as standard for chain counter. This five oceans s612 horizontal windlass has a stylish look, 100% stainless-steel design sit elegantly on the deck. For powerboats and sailboats. Working load (kgs/ib) 180/400 max. Not to mention, it’s fitted with a heavy-duty control arm and stripper. Noteworthy is the “failsafe” gypsy lock that prevents accidental deployment while underway. Installation details if the deck is not flat, a suitable mounting pad may be required to take up camber or sheer. ) Speed down/min 82′ maximum pull 1200 lbs (540 kg) motor 600w voltage 12 volts current draw(a) 20 amps max. The standard (1/4″) threaded mounting studs supplied suit deck and packing thickness of up to 50 mm (2″).
WINDLASSES ANCHOR RODE- 1/2″ 8 PLAIT NYLON SPLICED TO 1/4″ GALVANIZED CHAIN (150)
- Eight plait anchor rodes have a few distinct advantages over three strand rodes. Premium nylon rope back-spliced to calibrated chainabrasion resistantshock absorbentcompatible with windlasseslewmar pro-sport 550lewmar pro-fish 700lewmar pro-series 700maxwell hrc6. Second, since the line has no bias clockwise or counter clockwise, the rope will not hockle or kink, allowing the windlass to manage the rope better. The more air in the locker, the less line capacity you’re able to carry onboard. First, eight plait rodes have a looser, bi-directional woven lay, allowing it to drape over itself, reducing air voids found between the coiled, denser line found in three strand rodes. Windlass anchor rode, 1/2″ 8 plait nylon rope spliced to 15′, 1/4″ g4 high test hot-dipped galvanized chain. Third, eight plait rope is able to absorb higher shock loads than three strand rope.
Five Oceans Foot Switches, Windlass – BC 3291-1
- The firm hinged cover protects the switch from both accidental operations, and from the harshest marine environments. This enclosed single-direction foot switches for use on the bow or as a second switch station to control operation of all five oceans windlass models. Specification, for dc electric windlasses running on 12v or 24v, single direction switches (raise & lower), hinged cover to prevent accidental operation, normally open contact, 5a (12/24v dc) product number 3291.
Powerwinch Sport Fishing 450 FreeFall Anchor Windlass
- 70 fpm retrieval speed weighs 21 pounds 2-year warranty. Drops up to 4 times faster (150 fpm) than power-down anchors. Free-fall anchor system designed for sport fishing boats. Makes it easy to anchor boat in precise location (no drifting). Stainless-steel rope and fasteners and watertight seals.
Lewmar V1 GO 12V (002) Stainless Steel Windlass
- The beautiful styled deck unit conceals a robust, reliable drive train, worm gearbox and splined shaft for maximum strength and control. Lewmar introduces the world’s first compact stainless steel windlass for power and sail boats.
WINDLASS ANCHOR RODE- 1/2″ 3 STRAND NYLON SPLICED TO 15′ – 1/4″ GALVANIZED CHAIN (150)
- High-quality nylon fibers reduce hardening of the rope, nearly eliminating all knots and hockles. The rope is coated and heat stabilized for minimum water absorption and fiber-to-fiber abrasion. Twisted nylon rope maximizes the rode’s shock absorption while reducing wear and tear on your windlass, anchor roller and ground tackle. The g4 hot dipped galvanized chain is calibrated to fit windlasses with iso short link chainwheels. Windlass rodes are assembled using 3 strand premium nylon rope spliced to g4 high-test calibrated chain. Please check your windlass manufacturers specifications to ensure a proper match. Three strand windlass anchor rodes are designed and constructed differently than throw over anchor rodes. The combination of premium nylon rope and g4 high-test chain is suitable for all major windlass manufacturers.
1/4″ x 15′ Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain
- 1/4″ x 15′ iso g4 high tensile hot dipped galvanized windlass anchor chain is made of high tensile strength alloy carbon steel that provides a greater strength to weight ration than proof coil chain, iso short link which makes it more flexible and ideality suited as windlass chain, each link is proof tested and calibrated, and g4 stamped on links. Any length of this chain is available in our store.
Norestar 200 feet by 1/2 inch Braided Nylon Boat Anchor Rope and 15 feet by 1/4 inch Marine HT G4 Chain for Boat Windlass, Prespliced
- As well, each windlass will fit bbb chain, ht chain, or both. To determine your required chain and rope size, refer to your windlass manual. Specifications wbrht150-12 rope size, 1/2″ x 150′ chain size, 1/4″ x 15′ rope type, 24 strand double braided nylon chain type, galvanized ht g4 chain wbrht200-12 rope size, 1/2″ x 200′ chain size, 1/4″ x 15′ rope type, 24 strand double braided nylon chain type, galvanized ht g4 chain. Ideal for use with windlasses, this double braided nylon rope is professionally spliced to a generous amount of ht g4 chain. By purchasing a pre-spliced rope and chain package, you save the extra expense, time, and effort of custom splicing the rope and chain separately. Each windlass is equipped with a gypsy that fits a particular size of rope and chain. Note this rode is not suitable for lewmar 700 series windlasses. Ht chain may also be referred to as g4 chain, g43, acco ht chain, or high test chain, all of which are interchangeable. New braided rope should be soaked in water (salt or fresh ok) to condition the rope so it can be used in the windlass initially. When the rope is used dry and new, slippage or sticking in the gypsy can occur. Once wet and used, braided rope generally performs better than 3-strand. Remember to always confirm rope and chain size against your windlass manual as gypsies vary.
1/4″ x 6′ Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain
- 1/4″ x 6′ iso g4 high tensile hot dipped galvanized windlass anchor chain is made of high tensile strength alloy carbon steel that provides a greater strength to weight ration than proof coil chain, iso short link which makes it more flexible and ideality suited as windlass chain, each link is proof tested and calibrated, and g4 stamped on links. Any length of this chain is available in our store.
Maxwell RC 8-6 Vertical Windlass 1/4″ Chain, 1/2″ Rope 12V (RC8612V) (59011)
- Rc8-6 vertical windlass 1/4″ chain, rope 1/2″ 12vpackage includeswindlasson/off breaker panel reversing solenoidup/down panel switchemergency crank / clutch release handlefeaturessimple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlassunique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situationsfully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4″ (6mm / 7mm) chain spliced to 1/2″ (12 mm) three strand or 8-brait (plait) ropethe ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the rc8 seriesfull disassembly capability of topworks utilising handle provided and an allen keythe rc8 series is manufactured from marine-grade 316 stainless steel for long term durabilitythe heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the rc8 an unparalleled level of performancein combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressurethe rc8 works just as effectively with all-chain rodes for those who desire a low profile, elegantly styled windlass on their foredeckhuge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor lockerfull disassembly capability of the topworks utilising only the handle provided and an allen keymanual override using the emergency crank handle providedsealed oil b.
Five Oceans C900 Vertical Windlass 900W – 1/4″ Chain & 1/2″ Rope – BC 3287
- This five oceans c900 vertical windlass has a stylish low-profile, 100% stainless-steel design sit elegantly on the deck. ) Speed down/min 82′ maximum pull 1452 lbs (660 kg) motor 900w voltage 12 volts current draw(a) 55 amps max. These are adequate for most installations. Not to mention,it’s fitted with a heavy-duty control arm and stripper. Installation details if the deck is not flat, a suitable mounting pad may be required to take up camber or sheer. It includes an impact-resistant motor cover, solenoid and reed switch magnet fitted as standard for chain counter. For powerboats and sailboats. 50′ (175lb. Decks that are thin, or of foam or balsa laminate construction, will require reinforcement in order to spread the loads that will be applied to the deck while the windlass is in use. Package includes (wiring and fasteners are not included), solenoid, circuit breaker, up/down switch, foot switches, manual specification boat length to 35′ rode type rope/chain rode size 1/4″ ht chain, 1/2″ rope speed up/min. The standard (1/4″) threaded mounting studs supplied suit deck and packing thickness of up to 50 mm (2″). Power pull (kgs/ib) 660/1452 type vertical product number 3287. Working load (kgs/ib) 220/484 max. Noteworthy is the “failsafe” gypsy lock that prevents accidental deployment while underway.
Five Oceans Windlass Switch Panel – BC 3740
- The compact switch allows up/down operation from any remote station. Does not handle windlass current draw, but easily handles solenoid current. 3″ x 2″ specification • type windlass control (toggle) • dimensions 3″ x 2″ • voltage 12v • amperage 5 amps product number 3740.
Norestar 200’x1/2″ Braided Nylon Boat Anchor Rope and 15’x1/4″ Marine HT G4 Stainless Steel Chain, Boat Windlass, Prespliced Rode
- Designed for use with windlasses. Includes stainless steel ht g4 chain professionally spliced to double braided nylon anchor rope. Save money, time, and effort by purchasing a pre-spliced package. To determine your required rope/chain size, check your windlass manual.
Lewmar PRO-FISH 700 6 mm-7 mm-1/4″ Pro-Fish Windlass
- For boats up to 12m (38ft. Automatic freefall. 5-year warranty manual emergency recovery equipped all you need is a common 1/2 socket wrench. Powerful motor providing fast line speed convenient above-deck installation. Maximum pulling power 320kg (700 lb) for the 700 and 454kg (1,000 lb) for the 1000.
Marine Solenoid (3 Wires) Control Box for Anchor Windlass-1500w Max- Five Oceans
- The external connections on the solenoids make them very easy to install. Windlass regular solenoid, 1500w this control box operates anchor windlass system from 400 to 1500 watts 12 volts. The entire unit has been designed to simplify and speed up the various electrical connections. The solenoids are reliable and compact in size. Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Lewmar PRO-FISH 1000G 12V G4 – 102 Pro-Fish Windlass
- Plus, the pro-fish is diy ready and made of durable 100% 316 stainless steel. The pro-fish has an automatic freefall that allows you to pull right up over a wreck or ledge, and drop anchor with speed and precision. No more running your motor or wasting fuel while you hover fish. Our pro-fish model is the ultimate windlass for fishermen. And you can retrieve your anchor just as easily, with the push of a button.
Lewmar Pro Sport 550 Windlass Gypsy Only 1/4″ G4 Chain 1/2″ Line
- Minimal parts for enhanced reliability. 100% 316 stainless steel deck unit. Late configure boat / chain on boatyard assembly line features. The v700 now comes with a gypsy able to accept both 6mm and 7mm (1/4) inch chains. Fits calibrated chains 6mm din766, 1/4 g4 or bbb, 7mm din766.
Maxwell RC6 12V Windlass – 500W f/1/4 Chain to 1/2 Rope
- The rc6 is available only as a low profile unit (no optional capstan drum). The rc6 utilizes 6mm/7mm (1/4″) chain spliced to 12mm (1/2″) three strand or 8-plait rope. An inexpensive, high performance and great looking windlass the rc6 is built for durability and years of trouble free use. Kits includewindlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle. Maximum pull 660lbs. Providing most of the features of the larger rc8, the rc6 has been designed with the smaller, trailer boat market in mind. The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the diy aftermarket customer.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
