Narrow Body 30mm Rifle Scope Ring Set 7/8inch Weaver Low Medium Height
- Clamps onto weaver base/rail and tightens using a hex screw anodized matte black finish mounting width 15mm allen wrench included. Works with scopes, red dot sights and flashlights with 30mm main tube 22mm center height. Narrow width design for scopes with tight mounting surface. Good for mounting scopes with objective od up to 42mm. A pair of 30mm scope rings for 7/8″ weaver rails and bases made of solid aluminum alloy to withstand shock and recoil fits 7/8″ weaver mounts, rails and bases as commonly found on rifles, pistols, and some crossbows.
HAWKE 2pc Match Series Weaver Scope Rings, 1in, High, QuickPeep HM7103
- Hawke sport optics 2pc match series weaver scope rings, 1in, high, quickpeep 22114.
wipboten Rifle Scope Rings Medium Profile Scope Mounts for Picatinny/Weaver Rail
- ▶ Double scope ring mount for picatinny/ weaver rail (20mm). ▶ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. ▶ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. ▶ with 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1” scope firmly, just twist off the nut and mount the base on the 20mm rail easily. ▶ The ring is for most scopes which are in 1”/ 254mm scope tube medium profile, 05” gap from base of mount to bottom of ring ( item height 19”).
Hammers 1inch 1″ See Thru Weaver Tall High Rifle Scope Ring Set Silver Chrome
- High (30mm) center height good for mounting scopes with objective od up to 60mm. Fits 7/8″ weaver mounts, rails and bases as commonly found on rifles, pistols, and some crossbows. Works with scopes, red dot sights with 1″ main tube. Made of solid aluminum alloy to withstand shock and recoil. Anodized matte silver chrome finish.
Skyvady 1-inch High/Medium Profile Scope Rings for Picatinny and Weaver Rails (2-Piece)
- With 4 fasten screws for more security and firm. Reusable eco-friendly packaging reduces environmental pollution and avoids wasted resources in disposable packaging. Made of aircraft-grade aluminum alloy. Anodized black matte finish, with 3mm allon wrench. Fits any picatinny/weaver rail.
Modkin Rifle Scope Rings, Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
- ☑ The ring is for most scopes which are in 1”/ 254mm scope tube medium profile, 05” gap from base of mount to bottom of ring ( item height 19”). ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. ☑ Double scope ring mount for picatinny/ weaver rail (21mm). ☑ with 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1” scope firmly, just twist off the nut and mount the base on the 20mm rail easily. ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.
Modkin Weaver Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
- The ring is for most scopes which are in 1”/ 254mm scope tube high profile, 098” gap from base of mount to bottom of rings ( item height 21”). Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. Double scope ring mount for picatinny/ weaver rail (21mm). With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.
JINSE Scope Ring Set 1 inch/30mm High Profile Multi Picatinny/Weaver Rail Scope Ring with Bubble Level
- Made of aluminum and black matte. Double scope rings mount for 20mm picatinny/ weaver rail. Mount to install a flashlight, laser sight or rifle scope onto the weaver rail. Bubble level：see-through,to maintain a perfect horizontal hold during extreme-range shooting.
GOTICAL Rifle Scope Rings – Picatinny Scope Mount Rings for 30mm Picatinny/Weaver Rail – 2 Pcs Medium Profile Scope Rings + 2 Pcs Low Profile Scope Rings – Pack of 4, 2 Pairs
- ❖ What’s included the package includes 2 pairs one pair has included 2 pcs 30mm low profile scope rings, 30mm and second pair has included medium profile scope rings, 30mm also 100% satisfaction of high quality and 24/7 hours of customer services. ❖ material a scope rings for hunting shooting 2 pair of rifle scopes rings is made up of t6 6061 aluminum alloy with high strength steel and black matte. ❖ Style & durable, solid a gotical rifle scope ring has standard picatinny rail and weaver scope rings style with durable black matte solid and safe. ❖ Installation the scopes mount rings very simple and quick to install and remove it has twist on/off the screw clamp nut via allen wrench, scope rings also has 1 rail clamp screw and 2 scope clamp screw in one side. ❖ Dimensions our both rifle scopes rings perfect for 21mm standard picatinny/weaver style rail and its perfect for mounting scopes rings which are in 30mm scope tube its weight 2 oz per ring and 05-inch gap from base of mount to bottom of ring.
SVBONY SV120 Rifle Scope 3-9x40mm Compact Hunting Scope Waterproof with Free Ring Mounts Fits 20mm Weaver and Picatinny Rails (Matte Black)
- Sv120 rifle scope with 3-9x magnification and 40mm objective lens parallax-free at 100 yards support shooting needs in different scenarios. 254mm one-piece machined aluminum tubeswaterproof and shock proof ensures outstanding water and fog proof performance. Zero-reset turrets sv120 rifle scope has 1/4 moaclick windageelevation adjustments with the ability to reset the zero the turrets for windage and elevation are smooth and “click” into place nicely and are marked so that it’s easier to sight in the scope at different yardages. Ample eye relief long 275-334 inch eye relief gets shooters on target quickly and easily which is nice throughout all the zooms easy to read reticle fully multi coated optical system multiple layers of anti-reflective compounds on every glass surface provide bright vivid pictures and optimum light transmission.
TACFUN – Field Sport Long Eye Relief Scout Scope 2-7X32 w/Weaver Scope Rings
- Field sport high quality scope buit on strong cardon jiont platform. With a pair of scope rings(fit 20mm weaver / picatinny rail) lens cloth allen tool. Length 105″ weight 9 oz. Magnification 2x-7x tube diameter 1″ objective 32 mm eye relief 85″, 105″ exit pupil 16, 46 mm fov (feet at 100 yds) 14, 46 moa 1/4 finish matte black. 2-7×32 long eye.
WINFREE 34 mm or 35 mm Diameter 2 Piece Profile Standard Picatinny Weaver Scope Ring Ring Tactical Hunting Sports Mount Accessory
- Blacksmith is not necessary for installation. Durable and rugged rugged structure. It conforms to weaver and picatinny’s base. 4 threaded ring with thin cap design.
Sniper Heavy Duty Picatinny/Weaver 1″ Mid-Profile See-Thru Scope Rings, Hard Anodized, Black
- Works with scopes, red dot sights and flashlights with 1″ main tube. Anodized matte black finish. Made of solid aluminum alloy to withstand shock and recoil. Medium (2670mm) center height good for mounting scopes with objective od up to 50mm. Fits 7/8″ weaver mounts, rails and bases.
Hammers Stainless Silver Chrome Rifle Scope 4-12×40 AO Parallax Adjustable Objective with Weaver Rings
- 5ft @100yards parallex adjustable eye relief 3inch @4x 2 3/4inch @12x overall lenght of the scope 13 1/2inch bungee corded lens caps included includes weaver scope rings in matching finish. The parallax adjustable objective can get precise focus at all yardages and get rid of parallax magnification 4x -12x 1 inch mono-tube body mil dot wire reticle fully-coated parallax adjustable 40mm objective lens finger adjustable windage/elevation adjustments with 1/4moa click value field of view 27. 8ft-10. A great scope for use with rifles shooting at range within 400yard range. Attractive and classy stainless silver chrome finish with matching rings.
See Thru 7/8″ Weaver 30mm Rifle Scope High Rings SR3002DH
- High (37mm) center height good for mounting scopes with objective od up to 62mm. Works with rifle scopes, red dot sights of 30mm main tube. Fits 7/8″ weaver mounts, rails and bases. Anodized matte black finish. Made of solid aluminum alloy to withstand shock and recoil.
WOLTIS Weaver Scope Rings Mount – Weaver 30mm Scope Rings Medium Profile,Tactical Riflescope Rings Mount for Weaver Rail(2pack,Aluminum)
- With 2 mountings screws on the side of the weaver rings 30mm, they will hold the scope mounting rings securely. Easy to installsold two rings per package. Precision machined from anodized aluminum alloy weight only 4 oz/120g(2 piece). The medium profile scope rings are perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters. The height of the center of the riflescope tube from the weaver base is 1 inch(27 mm).
Sparwod Rifle Scope Rings Mount Heavy Duty Medium Profile Tactical Scope Weaver for 20 mm Picatinny/Weaver Rail (1 Inch, Set of 2)
- ❖Heavy duty4 screw design with cut for weight reduction,weaver base mount with 2 top slots medium profile. ❖Exquisite workmanshipprecision machined from aircraft-grade aluminum alloy with anodized black matte finish. ❖Seethrough designsee through design allow you to aim with the rifle’s iron sight even with a scope installed. ❖Easy to installwith only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily. ❖fit to all 20mm railtactical mount ring medium profile with spirit level,1”/245mm diameter fit most scope and tactical flashlight.
Colin Gladstone Rifle Scope Rings 1 inch, Mount Medium Profile Scope Mounts for Picatinny/Weaver Rail – Pair of 2 (Medium)
- This ring is suitable for most oscilloscopes in 1-inch/254 mm oscilloscope tubesfits all picatinny/weaver rails. One rail clamping screw and two endoscopic clamping screws on each side ensure a secure installation of any 1” range. Precision machining, aircraft-grade aerospace aluminum alloy, surface anodized, matt black. Easy to install, stable and reliable, with hexagon socket head cap screws, built-in tape on each ring to prevent slippage and accurate position retention.
Colin Gladstone Rifle Scope Rings 1 inch, Mount Medium Profile Scope Mounts for Picatinny/Weaver Rail – Pair of 2
- Easy to install, stable and reliable, with hexagon socket head cap screws, built-in tape on each ring to prevent slippage and accurate position retention. Precision machining, aircraft-grade aerospace aluminum alloy, surface anodized, matt black. One rail clamping screw and two endoscopic clamping screws on each side ensure a secure installation of any 1” range. This ring is suitable for most oscilloscopes in 1-inch/254 mm oscilloscope tubesfits all picatinny/weaver rails.
Hammers Silver Chrome Mil Dot 3-9×40 10/22 .22 Mag Hunting Plinking Rifle Scope with Weaver Rings
- Magnification 3x -9x 1 inch tube body in chrome silver finish mildot reticle multi-coated premium 40mm objective lens quick focus ring at end of eye piece finger adjustable windage/elevation adjustments with 1/4moa click value field of view 39ft-13. 1inch @9x overall lenght of the scope 12 5/8inch bungee corded lens caps included includes weaver scope rings in matching silver chrome finish. 35inch @3x 3. 62ft @100yards parallex free@100yards eye relief 3.
WOLTIS 1 Inch High Profile Scope Rings – 1″ Scope Mount Picatinny Rail Weaver Scope Rings, Cowitness Scope Rings Mount
- Ring base designed with locking hex screws to tightly fit on mounts with 20mm picatinny weaver dimensions. 4 screws design provides compact attachment with the optic high quality aluminum making. Fits for 1 inch riflescope tube, fits max objective diameter 62mm. See through design for co-witness the iron sights on your rifles such as m1a rifle. This mount positions the center of the riflescope tube center at a height of 128″(325mm) from the top surface of the rail base.
See Thru 7/8″ Weaver Medium Height 30mm Rifle Scope Rings SR3002DM
- Fits 7/8″ weaver mounts, rails and bases. Anodized matte black finish. Made of solid aluminum alloy to withstand shock and recoil. Medium (2920mm) center height good for mounting scopes with objective od up to 50mm. Works with rifle scopes, red dot sights of 30mm main tube.
GOTICAL Marlin Rifle Tactical Pre-Drilled Weaver Picatinny Scope Sight Rail Mount Heavy Duty Attach scopes, Sights, Optics, flashlights, Scope Rings etc,
- Aircraft grade aluminum alloy mount with a black anodized finish. Marlin 9, 45, 30as, 30aw,36, 62, 93, 336,336c, 375 & 444,1993,1894, 1895 cowboy , glenfield 30, zane grey & camp-9 carbine marlin 922m & 989, mossberg 640,western field 740. Provides a industry standard 7/8″ weaver / picatinny tactical rail for attaching accessories such as scopes, sights, optics, flashlights, scope rings etc. Easy to install, will line up with the holes on your rifle, if you do not have the predrilled holes you will need to get your rifle tapped. Complete with screws & allen key for mounting.
TRIROCK Universal Scope Rings High Profile Barrel Mount 30mm 25mm 1 inch Ring Adapter & 20mm Picatinny Weaver Rail Mounting for Flashlight Laser Torch Sight
- Flashlight mount can also be installed on standard weaver rail alone. Fit for 25mm (1 inch) flashlight & laser sight tube mounting. There are 2 parts include 1pcs of low profile rail mount and 1pcs of barrel mount adapter you can use one of them seperately or install both parts together as high profile scope ring mount to meet your demand. Come with screws and allen key for installation easily. Precision machined from high-grade quality aluminum alloy with anodized black matte finish.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
