T-H Marine DSSDP-1-2-DP Designer Series Screw Down Deck Plates, 6″ – White
- Designer series screw down deck plates have a textured top, smooth tapered edges and are flanged to fit into the hole securely. They are made from a tough non-corrosive poly material and are uv and chemical resistant.
Tempress Pry-Out Inspection Deck Plates TEMPRESS INC
- Safety textured surface. Snap-fit closure & o-ring seal. 6 countersunk fastener holes. Beveled edge flange, pry-out notch. Lightweight. Weather-tight. Non-corrosive.
Beckson Marine Beckson 4″ Clear Center Screw Out Deck Plate – Black
- Screw-out deck platethe beckson screw-out plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. Center clear color black. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. A back-up sealing wall leaves the plate watertight, even if the gasket is removed.
DECK PLATE GASKET (O-Ring) for Pry Out 8″ Deck Plates
- Watertight with a positive “o” ring seal. Total uv and chemical stability. Beckson d8pg, becd8pg. Requires no tools for opening. No visible mounting fasteners.
Sea Dog 337160-1 Screw Out Deck Plate, 5-7/16Sea Dog 337160-1 Screw Out Deck Plate, 6″ – White
- Use silicone sealant on hull or deck surface when installing the deck plate. requires a 6-1/2” diameter cut out for use. Sea-dog line deck plates are molded to the highest standards using top quality uv stabilizers and antioxidants. Note avoid contact with acetone or strong solvents. Keep threads clean with hot soapy water. Lubricate with vaseline or teflon grease. Injection molded abs.
Sea Dog 337140-1 Screw Out Deck Plate, 4-7/16″ / White
- Lubricate with vaseline or teflon grease. Injection molded abs. Sea-dog line deck plates are molded to the highest standards using top quality uv stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Note avoid contact with acetone or strong solvents.
T-H Marine DPS-6-1-DP Sure-Seal Screw Out Deck Plates, 6″ – Black
- Requires no tools for opening. They are watertight with a positive “o” ring seal and no visible mounting fasteners. Sure-seal deck plates provide easy access to fittings, seacocks, valves, and other systems. Total uv and chemical stability.
Nicro N10864DW 4″ deck plate, white snap-in
- Diameter of outer ring, 123 mm (484″). Mirror polished. Diameter of inner plate, 81 mm (319″). 316 marine grade stainless steel. Nicro ventilation systems n10864dw, nvsn10864dw.
H2o 5 Inch Deck Plate (Black)
- Lubricate with vaseline or teflon grease. 5 inch deck plate ( black) these deck plates are moulded to the highest standards. Keep threads clean with hot soapy water.
Stainless Steel Boat Marine Deck Plate 3”
- Stainless steel316 deck plate. Inner dia=762mm. Overall dia=123mm.
3“ Boat Deck Plate by Salty Reef Marine Hardware Made from Heavy Duty 316 Marine Grade Stainless Steel
- Low profile for deck safety without loss of durability. Aisi stainless steel 316 provides a long service life that will retain an attractive, clean finish with low maintenance for the discriminating yachtsman. Salty reef marine hardware dependability trusted by boaters world wide and uscg approved. 3 inch inside diameter port hole has o-ring seal around cover keeps water out.
Jili Online 2pcs 4” Marine Screw Out Round Deck Plate Inspection Hatch Access Boat RV
- 63″, net opening 4″, cut hoe size 4-1/2″package includes2 pieces deck plate. Description, material durable abs plastic, portable rotation installation, uv resistant, anti-aging, vertical installation and horizontal installation, twist/screws out easilyspecification, round utility hatch 4″, color white, inner diameter 114mm /4″, outside diameter 143mm / 5.
MARINE BOAT WHITE PLASTIC DECK PLATE 5″D WATERPROOF INSPECTION BAYONET TYPE
- 5″ distance between two opposite screw holes 6″ you will need to use silicone waterproof sealants on each of the six screw holes to prevent water from seeping through the holes. Opening diameter 5″ overall diameter 6. This is a high quality waterproof inspection deck plate made of uv stabilized plastic. Item p13561wh.
DP80W Beck 8Inwhite Deck Plate
- Self-aligning center & gasket assures watertight seal. Use in compartments where change in air pressure due to temp or oil canning can occur. Patented back-up sealing wall leaves plate watertight. Access without tools.
Five Oceans 6″ Screw-in Deck Plate – BC 85
- Specification material uv-resistant asa plastic leak-proof abs deck plates u. Use only 100% silicone caulk with a cutout diameter 6 1/2″ (165mm). Overall diameter 8″ (203mm). V. Resistant coarse thread for easy use product number 85. The 6″ screw-in deck plate is designed with a rubber o-ring that creates a watertight seal for safety. Additionally, this particular plate style has a single-start, non-jamming (no cross-threading), extra-strong, self-cleaning buttress thread.
X-Haibei Round Boat Marine Inspection Hatch Deck Plate Access RV Plastic 6″ White
- Strong plastic molded design, anti-aging, anti-corrosive,ultraviolet resistant durable water-tight o-ring low profile design reinforced design with a non-slip surface easy to install pre-drilled countersunk holes (screws not included).
Sea Dog 337150-1 Screw Out Deck Plate, 5-7/16″ / White
- Note avoid contact with acetone or strong solvents. Injection molded abs. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with vaseline or teflon grease. Sea-dog line deck plates are molded to the highest standards using top quality uv stabilizers and antioxidants.
Nicro N10863DW 3″ deck plate, white snap-in
- Deck plate dimensions 5-7/16″. Face plate dimensions 6-3/4″. Deck plate 3. Molded to the highest standards using top quality uv stabilizers and antioxidants.
MARINE BOAT BLACK PLASTIC DECK PLATE 4″D WATERPROOF INSPECTION BAYONET TYPE
- This is a high quality waterproof inspection deck plate made of uv stabilized plastic. Opening diameter 4″ overall diameter 5. 8″ distance between two opposite screw holes 5″ you will need to use silicone waterproof sealants on each of the six screw holes to prevent water from seeping through the holes. The recommended screws for this deck plate is p20004-01. Item p13560bk.
SeaSense Stainless Steel Deck Plate Key
- Limited lifetime warranty. Includes a shackle key, screwdriver, bottle opener. Stainless steel pocket tool. Fits common hex sizes. Designed to fit all deck plate caps.
T-H Marine DPS-6-2-DP Sure-Seal Screw Out Deck Plates, 6″ – Polar White
- Total uv and chemical stability. Sure-seal deck plates provide easy access to fittings, seacocks, valves, and other systems. Requires no tools for opening. They are watertight with a positive “o” ring seal and no visible mounting fasteners.
Perko 12487-8DP Marine Deck Plate Key for 520 Deck Plate
- The perko inc (dp items) deck plate key is the perfect boating accessory to keep with your ever expanding tool kit.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
