21 Most Wanted Shark Rigs

 

Weighted Shark Rig - 270 Brown Cable 100 Hook

Weighted Shark Rig – 270# Brown Cable, 10/0 Hook

Weighted Shark Rig – 270# Brown Cable, 10/0 Hook - After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The covering (1) prevents frayed ends of shark wire cutting up your monofilament in the event your lines do cross | (2) helps protect your hands when leadering or changing baits | (3) causes less damage to soft baits when you bury the hook | (4) cuts down on nasty pieces of old bait getting stuck when you store your rigs for your next awesome day of sharking. By mixing in weighted rigs it allows us to run three shark lines even on the worst days, but as many as five (three unweighted, two weighted) on good days without crossed lines or tangles. This extra weight gets your bait lower in the water column and also helps to get your bait away from the boat on very calm days. This listing is for our 10/0 stainless steel big game hook weighted shark rig (270# test, 7×7 49 strand construction brown stainless steel cable). Our unique weighted shark rigs use a heavy duty weighted swivel, rather than the traditional swivel. On days when your lines are crossing or the boat is spinning, put a weighted rig on your middle line (yes underneath the float) and it will sit a bit different and give you more space. Like our traditional shark rigs, a key feature to all cardinal tackle shark rigs is the protected connection. To summarize points 1-4, the connection covering prevents the shark wire from fraying near the crimps and stabbing many different things which ultimately eliminates various levels of frustration or pain to you, the fishermen.

 

Shark Rig - 480 Cable 200 Circle Hook

Shark Rig – 480# Cable 20/0 Circle Hook

Shark Rig – 480# Cable 20/0 Circle Hook - The finished rig is ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. This non-stainless, non-offset, circle hook shark rig is new york e. Like all of our rigs, each one is made by hand in the usa. This listing is for our 20/0 carbon steel inline circle hook shark rig (480# test, 7×7 49-strand construction bright stainless steel cable). After double-crimping the hook and swivel on our benchtop press, we cover it with a short length of heat shrink tubing. A key feature to all cardinal tackle shark rigs is the protected connections. The heat shrink tubing (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. C. § 13-0338 compliant. L. Our shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 rosco brass swivel. Folks also use these rigs for land based shark fishing with a heavy monofilament leader.

 

Calcutta CSHK80 Shark Rig

Calcutta CSHK8/0 Shark Rig

Calcutta CSHK8/0 Shark Rig - This soft plastic formulation along with the slender shape of the shaking squirrel gives it maximum movement in the water. The shaking squirrel is manufactured out of a softer plastic formula than other squirrel tail products. The primary design behind the shaking squirrel was to be used for drop shot techniques, but jeff has found it works well in all finesse presentations.

 

Sea Striker SSSRD Shark Rig Fishing Hook Accessory

Sea Striker SSSRD Shark Rig Fishing Hook Accessory

Sea Striker SSSRD Shark Rig Fishing Hook Accessory - Stainless steel open-eye rigging needles. The tube of 3-pack needles are individuallytest bead chainreusable plastic tubesurgical tubing or plastic tails.

 

Shark Rig - 270 Brown Cable 110 Hook

Shark Rig – 270# Brown Cable, 11/0 Hook

Shark Rig – 270# Brown Cable, 11/0 Hook - After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. Our shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a stainless steel big game hook and 4/0 rosco brass swivel. The heat shrink tubing (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. Like all of our rigs, each one is made by hand in the usa. This listing is for our 11/0 stainless steel big game hook shark rig (270# test, 7×7 49 strand construction brown stainless steel cable). A key feature to all cardinal tackle shark rigs is the protected connections. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat.

 

Weighted Shark Rig - 480 Cable 110 Hook

Weighted Shark Rig – 480# Cable, 11/0 Hook

Weighted Shark Rig – 480# Cable, 11/0 Hook - The covering (1) prevents frayed ends of shark wire cutting up your monofilament in the event your lines do cross | (2) helps protect your hands when leadering or changing baits | (3) causes less damage to soft baits when you bury the hook | (4) cuts down on nasty pieces of old bait getting stuck when you store your rigs for your next awesome day of sharking. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. This extra weight gets your bait lower in the water column and also helps to get your bait away from the boat on very calm days. To summarize points 1-4, the connection covering prevents the shark wire from fraying near the crimps and stabbing many different things which ultimately eliminates various levels of frustration or pain to you, the fishermen. Our unique weighted shark rigs use a heavy duty weighted swivel, rather than the traditional swivel. On days when your lines are crossing or the boat is spinning, put a weighted rig on your middle line (yes underneath the float) and it will sit a bit different and give you more space. This listing is for our 11/0 stainless steel big game hook weighted shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). By mixing in weighted rigs it allows us to run three shark lines even on the worst days, but as many as five (three unweighted, two weighted) on good days without crossed lines or tangles. Like our traditional shark rigs, a key feature to all cardinal tackle shark rigs is the protected connection.

 

Sea Striker SSSRE Shark Rig Fishing Hook Accessory

Sea Striker SSSRE Shark Rig Fishing Hook Accessory

Sea Striker SSSRE Shark Rig Fishing Hook Accessory - The tube of 3-pack needles are individuallytest bead chainreusable plastic tubesurgical tubing or plastic tails. Stainless steel open-eye rigging needles.

 

Shark Rig - 270 Cable 160 Circle Hook

Shark Rig – 270# Cable 16/0 Circle Hook

Shark Rig – 270# Cable 16/0 Circle Hook - This non-stainless, non-offset, circle hook shark rig is new york e. A key feature to all cardinal tackle shark rigs is the protected connections. Our circle hook shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 rosco brass swivel. L. § 13-0338 compliant. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. C. Like all of our rigs, each one is made by hand in the usa. The heat shrink tubing (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. This listing is for our 16/0 carbon steel inline circle hook shark rig (270# test, 7×7 49 strand construction bright stainless steel cable).

 

Calcutta Shark Rig with No 270 Cable and Hook Size 90

Calcutta Shark Rig with No. 270 Cable and Hook, Size 9/0

Calcutta Shark Rig with No. 270 Cable and Hook, Size 9/0 - Comes in size 9/0. Quality craftsmanship and materials make this product a must have for any fisherman. Cable and hook is made of high quality materials. Calcutta is one of the most widely recognized and trusted names in the recreational fishing industry.

 

Weighted Shark Rig - 270 Brown Cable 110 Hook

Weighted Shark Rig – 270# Brown Cable, 11/0 Hook

Weighted Shark Rig – 270# Brown Cable, 11/0 Hook - After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. Like our traditional shark rigs, a key feature to all cardinal tackle shark rigs is the protected connection. This listing is for our 11/0 stainless steel big game hook weighted shark rig (270# test, 7×7 49 strand construction brown stainless steel cable). On days when your lines are crossing or the boat is spinning, put a weighted rig on your middle line (yes underneath the float) and it will sit a bit different and give you more space. This extra weight gets your bait lower in the water column and also helps to get your bait away from the boat on very calm days. To summarize points 1-4, the connection covering prevents the shark wire from fraying near the crimps and stabbing many different things which ultimately eliminates various levels of frustration or pain to you, the fishermen. By mixing in weighted rigs it allows us to run three shark lines even on the worst days, but as many as five (three unweighted, two weighted) on good days without crossed lines or tangles. Our unique weighted shark rigs use a heavy duty weighted swivel, rather than the traditional swivel. The covering (1) prevents frayed ends of shark wire cutting up your monofilament in the event your lines do cross | (2) helps protect your hands when leadering or changing baits | (3) causes less damage to soft baits when you bury the hook | (4) cuts down on nasty pieces of old bait getting stuck when you store your rigs for your next awesome day of sharking.

 

Weighted Shark Rig - 270 Cable 160 Circle Hook

Weighted Shark Rig – 270# Cable, 16/0 Circle Hook

Weighted Shark Rig – 270# Cable, 16/0 Circle Hook - The covering (1) prevents frayed ends of shark wire cutting up your monofilament in the event your lines do cross | (2) helps protect your hands when leadering or changing baits | (3) causes less damage to soft baits when you bury the hook | (4) cuts down on nasty pieces of old bait getting stuck when you store your rigs for your next awesome day of sharking. To summarize points 1-4, the connection covering prevents the shark wire from fraying near the crimps and stabbing many different things which ultimately eliminates various levels of frustration or pain to you, the fishermen. This extra weight gets your bait lower in the water column and also helps to get your bait away from the boat on very calm days. Our unique weighted shark rigs use a heavy duty weighted swivel, rather than the traditional swivel. By mixing in weighted rigs it allows us to run three shark lines even on the worst days, but as many as five (three unweighted, two weighted) on good days without crossed lines or tangles. Like our traditional shark rigs, a key feature to all cardinal tackle shark rigs is the protected connection. This listing is for our 16/0 commercial circle hook weighted shark rig (270# test, 7×7 49 strand construction bright stainless steel cable). On days when your lines are crossing or the boat is spinning, put a weighted rig on your middle line (yes underneath the float) and it will sit a bit different and give you more space. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing.

 

Shark Rig - 480 Cable 120 Hook

Shark Rig – 480# Cable, 12/0 Hook

Shark Rig – 480# Cable, 12/0 Hook - After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. This listing is for our 12/0 stainless steel big game hook shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). Each rig comes with an ez curl wrap and a strong usable ziplock bag in case you get it back. Like all of our rigs, each one is made by hand in the usa. The 10 ft length keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. A key feature to all cardinal tackle shark rigs is the protected connections. Our shark rigs are 10 feet long, made from 49-strand stainless steel cable, and double crimped with brass sleeves to a stainless steel big game hook and 4/0 rosco brass swivel. The heat shrink tubing (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip.

 

Rock Fish Candy 150 Mono Shark Rig

Rock Fish Candy 15/0 Mono Shark Rig

Rock Fish Candy 15/0 Mono Shark Rig - Effective light and small, inherit flexibility without compromising strength deliver ultra-smooth rotation and minimum twist. Strong mainly made of copper and stainless steel, sturdy constructed, ensure high strength. Shark rig. Size 2/0 | lb test 165lb | qty50pcs item color black nickle. Versatile good for various rigs and leader trace making high performance in bass fishing, general freshwater and saltwater, offshore fishing.

 

Blue Water Candy 132 4517-0529 Shark Rig

Blue Water Candy 132 4517-0529 Shark Rig

Blue Water Candy 132 4517-0529 Shark Rig - Acme sw225-m kastmaster baitfish. Item weighs 0. Model # 132. 07 pounds. 275lb cable 9/0 j-hook. Brand name blue water candy. Rigs.

 

Pacific Catch Shark Rig Lead Fishing Equipment

Pacific Catch Shark Rig Lead Fishing Equipment

Pacific Catch Shark Rig Lead Fishing Equipment - Made of the highest quality material. Manufactured in the country of china. Number one in fishing sports.

 

Shark Rig - 480 Cable 110 Hook

Shark Rig – 480# Cable, 11/0 Hook

Shark Rig – 480# Cable, 11/0 Hook - The heat shrink tubing (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. This listing is for our 11/0 stainless steel big game hook shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Our shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a stainless steel big game hook and 4/0 rosco brass swivel. Like all of our rigs, each one is made by hand in the usa. A key feature to all cardinal tackle shark rigs is the protected connections.

 

15 Shark Rig With Mustad Circle Hook 200

15′ Shark Rig With Mustad Circle Hook (20/0)

15′ Shark Rig With Mustad Circle Hook (20/0) - All of our shark rigs are made with a calibrated bench crimper to ensure proper crimping. End game tackle shark rigs are made with the highest quality components. These rigs have been successfully used by land based shark fisherman or by boat fisherman alike. The coastlock snap slides freely on the 10′ section of 400lb leader material. We source american made swivels and leader material and only use genuine mustad hooks. All of our rigs come in a resealable bag.

 

Weighted Shark Rig - 480 Cable 120 Hook

Weighted Shark Rig – 480# Cable, 12/0 Hook

Weighted Shark Rig – 480# Cable, 12/0 Hook - By mixing in weighted rigs it allows us to run three shark lines even on the worst days, but as many as five (three unweighted, two weighted) on good days without crossed lines or tangles. This extra weight gets your bait lower in the water column and also helps to get your bait away from the boat on very calm days. Like our traditional shark rigs, a key feature to all cardinal tackle shark rigs is the protected connection. To summarize points 1-4, the connection covering prevents the shark wire from fraying near the crimps and stabbing many different things which ultimately eliminates various levels of frustration or pain to you, the fishermen. On days when your lines are crossing or the boat is spinning, put a weighted rig on your middle line (yes underneath the float) and it will sit a bit different and give you more space. The covering (1) prevents frayed ends of shark wire cutting up your monofilament in the event your lines do cross | (2) helps protect your hands when leadering or changing baits | (3) causes less damage to soft baits when you bury the hook | (4) cuts down on nasty pieces of old bait getting stuck when you store your rigs for your next awesome day of sharking. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. This listing is for our 12/0 stainless steel big game hook weighted shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). Our unique weighted shark rigs use a heavy duty weighted swivel, rather than the traditional swivel.

 

Calcutta CSHK110 Shark Rig

Calcutta CSHK11/0 Shark Rig

Calcutta CSHK11/0 Shark Rig - The primary design behind the shaking squirrel was to be used for drop shot techniques, but jeff has found it works well in all finesse presentations. This soft plastic formulation along with the slender shape of the shaking squirrel gives it maximum movement in the water. The shaking squirrel is manufactured out of a softer plastic formula than other squirrel tail products.

 

Land Based Shark Rig Extra Large

Land Based Shark Rig Extra Large

Land Based Shark Rig Extra Large - Our land based shark rigs are the perfect combination of stainless steel cable and monofilament. C. Each 5. 5 foot lower leader uses 7×7 49 strand construction bright stainless steel cable double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 rosco brass swivel. This non-stainless, non-offset, circle hook shark rig is new york e. After double-crimping the hook and swivel, the lower leaders connections are protected with a short length of heat shrink tubing. L. Like all of our rigs, each land based shark rig is made by hand in the usa. § 13-0338 compliant. This listing is for one extra large land based shark rig with 20/0 carbon steel inline circle hook, 480# stainless steel cable and 400# monofilament. The upper and lower leaders are attached at the snap swivel, which is also the perfect spot to add your weight. The finished rig is over 15 feet long. Each 15 foot upper leader 400# blue smoke monofilament crimped to a heavy duty snap swivel and 4/0 rosco brass swivel.

 

Land Based Shark Rig Large

Land Based Shark Rig Large

Land Based Shark Rig Large - L. Each 5. Each 15 foot upper leader 400# blue smoke monofilament crimped to a heavy duty snap swivel and 4/0 rosco brass swivel. This non-stainless, non-offset, circle hook shark rig is new york e. § 13-0338 compliant. 5 foot lower leader uses 7×7 49 strand construction bright stainless steel cable double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 rosco brass swivel. C. Like all of our rigs, each land based shark rig is made by hand in the usa. This listing is for one large land based shark rig with 18/0 carbon steel inline circle hook, 480# stainless steel cable and 400# monofilament. Our land based shark rigs are the perfect combination of stainless steel cable and monofilament. After double-crimping the hook and swivel, the lower leaders connections are protected with a short length of heat shrink tubing. The upper and lower leaders are attached at the snap swivel, which is also the perfect spot to add your weight. The finished rig is over 15 feet long.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.