Specialty Archery Screw-In 1/32″ Aperture
- Specialty archery 1/32 aperture that will fit in all super peeps, the use of a peep reducer is needed for the aperture to fit in the 1/4 peeps. Will screw directly into specialty archery peeps with use of the dual aperture wrench which is sold separately.
Specialty Archery Super Peep 1/8 Aperture – Number 2 Lens
- For use with sights or target scopes with a magnified lens. No 1 clarifier for use with 2-4x scope, no 2 clarifier for use with 4-6x scope, no 3 clarifier for use with 6-8x scope. For use in all 1/8″ specialty peeps (and 1/4″ peep with reducer). Used to make the target picture more clear.
Specialty Archery Peep Aperture with #1 Clarifier (Yellow) Lens (1/8″)
- Will also work in the 1/4″ peep housings, but the peep reducer (#753-3, not included) is required for installation. Works in all standard size pro series and ultra lite peep housings. Works with a bow scope and lens to help clear up the target. Five sizes available 1/32″, 3/64″, 1/16″, 3/32″, 1/8″.
Specialty Archery Dual Aperture Wrench
- For use in all 1/8″ specialty peeps (and 1/4″ peep with reducer). Wrench for interchanging verifiers, clarifiers, and apertures. For use with sights or target scopes with a magnified lens. No 1 clarifier for use with 2-4x scope, no 2 clarifier for use with 4-6x scope, no 3 clarifier for use with 6-8x scope.
Specialty Archery Pro Series 45 Degree Hooded Peep Red
- Red. The 45 degree peep is generally used on bows 40 longer. The new pro series peep is a sculpted to trim weight and boost bow performance. The peep opening is 3-16 and accepts all specialty archery 1/8 apertures, clarifiers that sharpen target faces, and verifiers that sharpen pins. This results in increased arrow speed. Use of the dual hex aperture wrench for insertion and removal of optional apertures, clarifiers, and verifiers is recommended. The hooded peep is 25% lighter on your string than the original hooded super peep housing.
Specialty Archery Peep Aperture with #3 Clarifier (Red) Lens (1/16″)
- Five sizes available 1/32″, 3/64″, 1/16″, 3/32″, 1/8″. Will also work in the 1/4″ peep housings, but the peep reducer (#753-3, not included) is required for installation. Works with a bow scope and lens to help clear up the target. Works in all standard size pro series and ultra lite peep housings.
Specialty Archery Pro Series 37 Degree Hooded Peep Black
- The super ball peep is designed to accept all of the super peep 1/8 apertures, clarifiers, and verifiers. The peep opening is 3/16. The 37 degree peep is generally used on bows 40 and shorter. The 37 degree super ball peep with crowned slots is the most versatile peep ever designed. Use of the dual aperture wrench is recommended for insertion of optional apertures, verifiers, and clarifiers.
Specialty Archery Clarifier 3/64 in. No. 1.5
- For use in all 1/8″ specialty peeps (and 1/4″ peep with reducer). Must be used with 1/8″ specialty peep sight or 1/4″ model with reducer. Used to make the target picture more clear. For use with sights or target scopes with a magnified lens. Clarifiers allow the archer to see the target clearly when using a magnified lens in their sight or target scope.
Specialty Archery Super Peep 3/64 Aperture – Number 1 Lens
- Used to make the target picture more clear. For use with sights or target scopes with a magnified lens. No 1 clarifier for use with 2-4x scope, no 2 clarifier for use with 4-6x scope, no 3 clarifier for use with 6-8x scope. For use in all 1/8″ specialty peeps (and 1/4″ peep with reducer).
Specialty Archery Super Peeps 3/32″ Aperture with Number 2 lens
- Used to make the target picture more clear. No 1 clarifier for use with 2-4x scope, no 2 clarifier for use with 4-6x scope, no 3 clarifier for use with 6-8x scope. For use with sights or target scopes with a magnified lens. For use in all 1/8″ specialty peeps (and 1/4″ peep with reducer).
Specialty Archery Sight Sun Shield (small, black)
- Black. The sun & rain shield is available for the super scope. Using velcro straps, it goes on or off in seconds. Shield only, scope not included.
Specialty Archery Verifier in 1/4″ Peep Aperture, #753-XX (Pink #6)
- 25-1. 75 reading glasses #7 verifier 1. The 1/4″ aperture (viewing area 3/16″) is available in your choice of #4 (silver mark), #5 (purple mark), #6 (pink mark), #7 (blue mark), #8 (white mark), or #9 (orange mark) verifier. Below are general guidelines are general for determining which verifier to get, and may not work for everyone. The #4, #5 and #6 verifiers are the most commonly used. Don’t let changes in your vision compromise your ability to make the shot. 00 or weaker reading glasses #5 verifier 1. 75-2. The specialty archery verifier has a lens in it similar to the ones in your reading glasses that will allow you to see your sight pins better on your hunting sight. 00-2. This verifier fits in the 749-37l or 749-37lh peep (not included). 00 reading glasses #8 verifier 2. 50 or higher reading glasses. Keep in mind if you go too strong you may blur your target. 50 reading glasses #9 verifier 2. 25 reading glasses #6 verifier 1. #4 verifier 1. The verifier lens sharpens the picture so pins are easy to see.
Specialty Archery Prod Spr Scope Super Circle & Dots
- The stick-on circles and dots customize the aperture to your style of shooting.
Specialty Archery Cable Ball Clamp for Arrow Rests
- Ball clamp designed to work with fall/drop away rests. Simply attach the elevation string for your rest to the cable with the ball in the proper position so your rest rise`s into the shooting position when full draw is obtained.
Specialty Archery Large Level
- Level is red and measures 1. Large sight level for use in specialty 1 5/8″ super scope and pro series xl scope. 373″ in length.
Specialty Archery 1/4″ Large Hooded Peep Sight, #749-37LH (Green)
- Specialty archery 1/4″ large hooded 37 degree aluminum peep sight (749-37lh). Includes peep, peep reducer and dual aperture wrench. The 1/4″ large hooded peep 37 degree helps reduce glare on clarifier and verifier lenses. The ¼” large hooded peep accepts all 1/8″ apertures, verifiers, and clarifiers with use of the peep reducer (part 753-3). It accepts all current ¼” verifiers, clarifiers, and apertures.
SPECIALTY ARCHERY LLC Peep Reducer
- This peep reducer is needed when you use apertures on any 1/4″ peep housing. For use in all 1/8″ specialty peeps (and 1/4″ peep with reducer). For use with sights or target scopes with a magnified lens.
Specialty Archery Screw-In 3/64″ Aperture
- Specialty archery 3/64 aperture that will fit in all super peeps, the use of a peep reducer is needed for the aperture to fit in the 1/4 peeps. Will screw directly into specialty archery peeps with use of the dual aperture wrench which is sold separately.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
